The FT-1000MP was introduced in 1996 as the second generation of the FT-1000 series. Featuring a highly-effective Enhanced Digital Signal Processing (EDSP) technology, the FT-1000MP brought a new layer of selectivity and noise reduction to the FT-1000 concept.

Microphones
M-90D	The M-90D and M-90MS utilizes a dynamic microphone element that is finely tuned to deliver rich low to mid frequency response desirable for a clear and concise conversation.  Using a windscreen cover and a directional micophone element, the structure of the microphone of the M-90D and M- 90MS is designed to concentrate voice input from the front while reducing ambient noise from the side. Built-in Low-Cut filter creates clear and crisp audio characteristics by shaping the low frequency response (cut off at 340Hz, -6dB/octave).  An isolation transformer is integrated in the circuit board in order to enhance the audio quality. The M-90D and M-90MS* are compatible with all YAESU HF transceivers equipped with the round 8-pin microphone connector or the 8-pin modular microphone connector.  The PTT of the M-90D uses three Air-Cylinder tubes similar to the Reference Microphone M-1. This provides solid and smooth extended operation.  A simple one-touch PTT keylock button is placed directly above the PTT key for those long rag chews.
M-90MS	Microphone Stand Kit (microphone stand is not included).
SCU-53	Cable 11.8" (300mm) for M-90MS Kit: 8 pin modular jack to round 8 pin plug *SCU-35 cable is required only when connecting the M-90MS with the HF Transceivers equipped with a round 8-pin microphone connector.

FT-1000MP Operating Manual